HOME

  HELP

  SITE MAP
 

  Additives

  Cells

  Electrical Parts

  Joe Cell

  Spark Plugs

  Stainless Steel

  My Videos

  Favorite Sites

  Questions

 


2nd Amendment

BigFoot - Sasquatch

Black Powder Making

Build a Wood Tree Stand

Moonshine Stills

Hemp Revolution

 

 

 

Gasket Material

 
   
  http://www.rubbercal.com/Sheet_Rubber_Fab.html?gclid=COOA0fKO3rwCFa47MgodoSkAEA

 

  1/16 in Pond Liner / Tub Liner
 
  Buna-N square stock 'O' rings
  high temperature 1/16" thick EPDM
  White Nitrile ( Buna-N)

 

EPDM Rubber Sheet
 
Ethylene Propylene Diene Monomer, provides very good resistance to weathering, ozone and UV exposure. It is highly recommended for applications where the elastomer will have excessive exposure to the environment. EPDM provides very good chemical resistance and dynamic properties. E.P.D.M. blended material is considered a non-oil resistant material. Good for hot and cold temperatures  (-40 to +320° F).

   Available at Rubber-Cal.com

   
   
   
Most Dry Cells are using High Temperature EPDM Rubber for gasket material and their end plates are made from 3/4 inch high temperature HDPE plastic.
 
   
   

    Copyright © 2003   All rights reserved.   Revised: 04/03/22.                                             Web Author, David Biggs
The information presented on this web site is for information purposes only. Should you decide to perform experiments or construct any device, you do so wholly on your own responsibility
-- Neither the company hosting this web site, nor the site designer author are in any way responsible for your actions or any resulting loss or damage of any description, should any occur as a result of what you do.