| Mark 4 Cell
These are the components of a typical Mark 4 orgone
accumulating cell. Note the rubber insulator/spacers beside top dome with
outlet
Please note the 1" cathode cylinder with ss threaded
rod terminal/mounting bolt insulated in situ in bottom dome. As the top and
bottom domes are 2" deep, the length of outer case (positive) is shortened
to 8". The bottom level of the nest of negative and neutral cylinders will
be 1/2" lower than the level of the 4" outer case when it is press fitted to
the bottom dome.
All cylinders are seamless (no welds) and the domes
have been machined for a very tight press fit onto 4" outer case. The top
dome has also been machined for a tight press fit of the 90 degree 1" ss
bend. The aim has been to build a cell without welds.
|
Experimenter's Guide to the Joe Cell
